Services Available:



To order Window Keys, please select from the menu above.

Cylinder keys cut to image/code from £4.97 each (plus £2.00 post and packing).

Mortice keys cut to image/code from £5.31 each (plus £2.00 post and packing).

Tubular keys cut to image/code from £6.30 each (plus £2.00 post and packing).

Non-electronic Car/Van/Caravan cylinder keys can be cut with many blanks stocked.

99% of key blanks stocked cut to image/code for less than £5.99 each (plus post and packing).

More than one thousand four hundred different types of key blanks in stock

Some specialist keys will cost more.

Currently unable to cut dimple or laser keys.

Free keyring with every order.

Free post and packing on orders over £20.00

Trev's Key Cutting is based in Stafford and only accepts UK orders.



To order:



For Window Keys select that menu option.

Remove key from keyring and then photograph front and back of key with the key horizontal across the frame, ensuring that the key is full frame and in focus as shown in the images below.

Please include something in the image for scale, such as placing the key on graph paper, against a ruler or next to a 2 pence piece.

It may be necessary to provide an extra image of the end of the key, this can be achieved by placing the key between your knees (see image of mortice key below), this will help achieve an in focus image.


Do not reduce the resolution of the photographs before sending as that may make it impossible to decode the key.


Include the make/model of the lock (if known) along with any known codes in the message text.


If you are ordering the keys to your front door it is advisable to have them delivered to a different address (to request delivery to a different address please provide an alternative address in the message text when requesting a quote).


To request a quote select "Quotes" from the menu above and fill in the form - the message will not be sent unless an email address and at least one image is attached.

Cylinder Key
Mortice Key
Dimple Key
Laser Key
Tibbe Key
Tubular Key
a green coloured tick symbol
a green coloured tick symbol
a red coloured cross symbol
a red coloured cross symbol
a green coloured tick symbol
a green coloured tick symbol

photo of front of mortice key photo of back of mortice key

photo of end view of mortice key
photo of front of a key photo of back of a key

photo of end view of a key

The example key above was very worn down and the replacement key which was cut to code (shown below) worked a lot better in the lock (The lock was replaced when the snib failed so is no longer in use).

photo of a newly cut key

For tubular keys a photo of the end of the key on top of a penny will allow the internal diameter of the key to be confirmed (tubular keys come in several different sizes). A photo from four different directions with the key balanced upon its end will allow the cuts to be measured.

The key below is 7.8mm internal diameter and the cuts viewed from the end in a clockwise direction are 0,4,4,0,2,6,2. This information can be obtained from the photos below and allow the key to be cut. The key below (Maxus MXKB3) can be cut for £6.30 each (plus £2.00 post and packing).
photo of tube key on a penny photo from direction 1 of tube key photo from direction 2 of tube key photo from direction 3 of tube key photo from direction 4 of tube key


Best efforts will be made to ship orders received before 3pm on the same day which should then (depending upon the postal service) arrive one working day later.

For technical enquiries please contact image of email address technical at trevskeycutting.co.uk